Krusader v 1.3 section 8.3 Moving Memory

Discuss software for the Apple 1/replica 1

Krusader v 1.3 section 8.3 Moving Memory

Postby sbenoit » Oct Sun 19, 2008 11:40 pm

System:
Replica 1 TE
Multi I/O board
KRUSADER 1.3 BY KEN WESSEN

enter and test code per section 2 Sample Section
(note: manual from CD that came with system, krusader12.pdf)
<-- snip -->
? L
000 LDA #'A'
001 LOOP JSR $FFEF
002 CLC
003 ADC #$1
004 CMP #'Z'+1
005 BNE LOOP
006 RTS
? A
0300-030C
? R $300
ABCDEFGHIJKLMNOPQRSTUVWXYZ

<--- end snip -->

Now I want to copy it to my multi I/O EEPROM located at $A000
so per section 8.3 then run the small program from $A000
<--- snip --->
? $\
50: 00 03 00 A0 00 0C
<---- end snip-->

OUTPUT
<---snip --->
50: 00 03 00 A0 00 0C

0050: F8
F20ER

F20E: C8\
A000
<----end snip --->

Am I entering the data properly?
srcH srcL destL destH sizeL sizeH
50: 00 03 00 A0 00 0C

F20ER <---vector to program to copy on a Replica 1 TE?

What output should i see?

here is my output:
<--- snip --->
A000.A00C
(not matching D $0300 info)
A000: 4C B0 E2 AD 11 D0 10 FB
A008: AD 10 D0 60 8A
F20E

F20E: C8
<-- end snip -->

Note:
I did use the basic program from another post to copy to the multi I/O and did run BASIC from the multi I/O, the multi I/O works.
sbenoit
 
Posts: 5
Joined: Oct Sun 19, 2008 9:50 pm

Postby Kallikak » Oct Thu 23, 2008 6:31 am

Sorry for the slow reply - I haven't had a chance to check the forums for a few days. The problem is the MOVE routine moved from version 1.2 to version 1.3. The address you want is now F204. This information can be found in the krusader 1.3 manual on my website.

Ken
Kallikak
 
Posts: 172
Joined: Jan Sun 29, 2006 7:42 pm
Location: Sydney


Return to Software

Who is online

Users browsing this forum: No registered users and 2 guests

cron