Briel Computers

replica 1

replica 1 plus

by on May.27, 2014, under replica 1

replica1plus_medThe new replica 1 plus

Great News! These kits and assembled replica 1 plus boards are now available again! You can get yours through ReactiveMicro

For the newcomer, the replica 1 is a functional replica of the original apple 1. Design changes allow for more memory with fewer components. Build a computer like they did in 1976! Play games and programs from the early days of computing.

The replica 1 is back! Based on the the fastest selling replica, the replica 1 tenth anniversary edition, the plus has improvements over the TE that make programming and power issues a thing of the past. Now you can power your replica 1 right off your PC or Mac or Tablet with the USB interface. With drivers installed, you can use a terminal program for sending/receiving programs or just use the terminal interface as your display and keyboard if you want. For those who prefer the stand alone feature, you can still use a composite monitor or TV and PS/2 keyboard. The ASCII keyboard port has been retained but for Apple II keyboards, a -12V supply or a Super Encoder board enhanced Apple II keyboard is required. Firmware changes now allow backspace or the original _ to be used just by selecting CTRL and F1. No more fighting backspace issues. Two versions of ROM’s onboard to select from! Yes, the original apple 1 with BASIC and now the Woz monitor and Applesoft lite can be used by adding a jumper! Enjoy floating point BASIC ported from the Apple II. To order yours, go to the STORE, the select replica 1.


Comments Off more...

replica 1 tenth anniversary edition

by on Nov.28, 2013, under replica 1

R110As previously mentioned in the new replica 1 tenth anniversary edition is here. It’s hard to believe it has been 10 years since the replica 1 was created. In celebration of 10 years of kits, we have a limited edition replica 1 ten board. The new design is our sleekest and most modern design ever. The mini USB interface is not only a power source, but has a built in USB to serial interface allowing you to have a virtual COMM port on your PC. You can run your entire replica 1 from a USB port on your PC or from a USB power supply.R110 kit

The new replica 1 ten limited edition has a unique red color distinguishing it from prior versions. As such, we are limiting it to only 50 hand serial numbered units. Why 50? Well, that is the number of apple 1 computers believed to still be in existence. In order to maintain an economical kit with today’s rising component prices, we found ways to reduce components and made some hard choices too. Gone is the ATX power supply option along with the 40 pin replica 1 header, however, there will be ways to get these features as needed. Don’t have a USB power supply, we now offer a universal USB power supply R110 DIAGRAM

The new design allowed us to eliminate the 1MHz oscillator and now the Parallax Propeller controller generates the system clock. We added a larger EPROM so you can now select between the original BASIC or the new Applesoft lite. We were also able to reduce chip count using the Propeller to handle critical I/O glue logic processing.  All these changes makes it possible to not only maintain the price, but also makes a smaller, more efficient board.

Preordering is over, orders are being filled.

replica 1ten limited edition kit $149

replica 1ten limited edition assembled and tested $199

replica 1ten universal power supply and cable $19

2 Comments more...

replica 1

by on Apr.03, 2010, under replica 1

The replica 1 is a functional clone of the apple 1 computer created by Steve Wozniak in 1976. This was the computer that Steve Jobs and Woz created to start Apple Computers in 1976. The latest version of the replica 1 is labeled TE for Third Edition. The replica 1 functions exactly like the apple 1 with many of the same components like a 6502 CPU and 6821 PIA. It comes with 32K RAM and 8K EEPROM. Addtional features like a ps/2 port, serial, ATX power connector and DC wall power supply connectors makes the replica 1 a fully functional computer system for todays collector or hobby builder. Available as a kit or assembled, the replica 1 is sure to give you hours of fun and excitement as you relive the glory days of computing. As a new feature, a full blown assembler called Krusader written by Ken Wessen was added to the EPROM space giving the user the ability to assemble 6502 programs right on the replica 1 without a PC. Write 6502 machine code programs using mnemonics instead of just programming hex code into the memory. This added programming tool makes the repica 1 not only a nostalgic computer but a great learning tool and introduction to microprocessors.



replica 1 TE improvements

  • Apple 1 compatible 44 pin slot
  • Apple 1 compatible 44 pin edge connector
  • Bread board area for hobby experiments
  • Elimination of jumpers
  • Improved video display using Parallax Propeller (works with most TV’s and monitors)
  • No need for Apple 1 slot adapter because Apple 1 slot now onboard as well as original replica 1 connector
  • User firmware updates. User can download firmware updates and install. No need to send in for new chips.

Add-on accessories

  • Compact Flash Adapter board
  • Slot 1 Expander (3 apple 1 expansion slot board)
  • Multi I/O board

Other information

  • Applesoft Lite Apple II Applesoft converted for the apple 1 and replica 1
  • Apple 1 ROMS These are the Actual Apple 1 nybble ROM images


This is a block diagram of the replica 1. The idea behind the project was to keep the design down to a minimum of parts and yet still allow full compatibility with the Apple 1 computer.

 This chart shows the memory map of the replica 1. The zero page is identical to the Apple 1, and the main program RAM is increased from 4K to 32K. The area occupied with BASIC was previously RAM on the Apple 1 but now is EEPROM so BASIC is resident in ROM at all times. This makes for faster loading of programs. Krusader also is resident in ROM. These do not change the compatibility of the replica 1 with the apple 1 but makes programming the replica 1 much easier than on the apple 1.


This is a diagram of the pinout of the expansion connector on the replica 1. It is different than the apple 1 in a few ways. First, it uses standard IDC 40 pin connector like on a IDE hard drive. Secondly, there are only 40 pins instead of 44 because some of the pins on the apple 1 were not needed to replicate the computer.





The multi I/O board is an all-in-one solution that gives the user 2 8 bit bi-directional ports with 4 handshaking lines, a true RS232 serial port with speeds up to 19,200 BAUD, and a 8K EEPROM programmer to store data or programs. There is a socket to add your own speakjet voice chip that works in conjunction with the serial port to make your replica 1 or apple 1 speak! The speakjet is not included but can be purchased here.



The CFFA1 is a add on storage card for the replica 1 and apple 1 computers. It uses compact flash cards to allow you to load/store programs onto your replica 1 or apple 1 computer. The menu driven card has the ability to format, create 1 level deep subdirectories, load, save basic and assembly language programs. This is the only storage card you need for the replica 1.

Comments Off more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!


A few highly recommended websites...