Briel Computers

by on Mar.06, 2013, under Vince's blog

Well, my wirewrap project has been on standby while the design details get worked out. It appears that I’m running out of I/O pins on a micro controller and I’m having to dance around that a bit. I should be starting today. This may be my first board that is all 3.3V based. My other boards all use standard TTL 5V logic levels for most of the work and 3.3V where needed. This causes interfacing issues so I may think outside the box again. I like having all my projects do something a little different. The replica 1 TE was the first kit I used the Propeller on. The Micro-KIM was the first kit I kept most of the original design. The Altair 8800micro was the first CPU emulation I wrote. What’s next? Hopefully I can post pictures soon, but I don’t want to show something that is years away, so I’ll post updates when I have a board working.

What I can say is that with the help of Jac Goudsmit I have a Propeller micro controller connected to a 6502 bus using the Propellers onboard memory as video RAM. This means I can connect a Propeller controller to a 6502 system and directly address video RAM at 1MHz speed. We also have the ability to eliminate ROM this way but the project I’m working on also has a serial port and keyboard. This is where aspirin gets applied. We need to shuffle 1 or 2 pins to give us the I/O required for everything. Once this is done, the project will make a nice single controller I/O package for 8 bit processor systems.


1 Trackback or Pingback for this entry

Leave a Reply

You must be logged in to post a comment.

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Blogroll

A few highly recommended websites...