Page 1 of 1

CFFA firmware mod for multi I/O serial use!

PostPosted: Nov Tue 06, 2007 8:33 am
by vbriel
Dave Lyons has been working on a revision of the CFFA1 firmware while at the VCF to allow using it through the serial port on the Multi I/O board.

If you have your own serial port already and a CFFA1, you need to have the serial port addressed at C300 or change the addressing in the code. I'll try and find exactly where the code handles the serial port when time allows.

I'll be posting the update once it is tested working. Just got home, lots to do.

Vince